Skip to main content

Application Lifecycle Hooks

Each plan can specify lifecycle event handlers, or hooks, to perform certain actions during a service’s runtime. Each hook is a script with a shebang defined at the top to specify the interpreter to be used. On Windows, Powershell Core is the only interpreter ever used.

To define a hook, simply create a file of the same name in /my_plan_name/hooks/, for example, /postgresql/hooks/health-check.

Optionally you may add an extension to the hook file. For example, you might create /postgresql/hooks/health-check.sh which can be useful in some editors to automatically take advantage of syntax highlighting. Note that having two files for the same hook but with different extensions is not permitted. For example you might create a run.sh and run.ps1 to support both Linux and Windows packages. If you would like to create different hooks for different platforms, you must use target directories.

Warning

You cannot block the thread in a hook unless it is in the run hook. Never call hab or sleep in a hook that is not the run hook.

Runtime Settings

Chef Habitat’s runtime configuration settings can be used in any of the plan hooks and also in any templatized configuration file for your application or service.

Note

In Chef Habitat 0.68.0 and less, some hooks used _ in their names. This is now deprecated; if you used them, please use - instead.

file-updated

File location: <plan>/hooks/file-updated. This hook is run whenever a configuration file that is not related to a user or about the state of the service instances is updated.

health-check

File location: <plan>/hooks/health-check. Default: 30 seconds

This hook repeats at a configured interval. There are two exceptions to the interval used between health-check runs:

  • If the health-check hook exits with a non-ok status the next health-check will run after the default health-check interval (thirty seconds). This is only done when the configured interval is greater than the default interval.
  • If the health-check hook returns an ok status for the first time, then the next health-check will run after a randomly chosen delay between 0 and the configured health-check interval. This introduces a splay - a degree of difference - in the timing between the first and second health-check runs. All following health-check hooks run at the configured interval. The splay prevents more than one health-check hook from starting at the same time by giving each of them a unique starting point.

The health-check script must return a valid exit code from the list below.

  • 0- ok
  • 1- warning
  • 2- critical
  • 3- unknown
  • any other code - failed health check with additional output taken from health-check stdout.

A health-check hook can use the following as a template:

#!/bin/sh

# define default return code as 0
rc=0
program_that_returns_a_status
case $? in
  0)
    rc=1 ;;
  3)
    rc=0 ;;
  4)
    rc=2 ;;
  *)
    rc=3 ;;
esac

exit $rc

init

File location: <plan>/hooks/init. This hook is run when a Chef Habitat topology starts.

Note

If the init hook fails with a non-zero exit code, the service will be restarted with the configured service backoff.

install

File location: <plan>/hooks/install. This hook is run when a package is initially installed.

An install hook may be triggered by hab pkg install or by a Supervisor loading a new package. Note that any package can define an install hook and it is not limited to packages that are loaded as services into a Supervisor. A package may have dependencies defined in pkg_deps or pkg_build_deps that define their own install hook. An install hook defined in an dependant package that has not yet been installed will run when the parent package is installed. However install hooks in a runtime dependency (pkg_deps) will not run when loaded via a package build inside of a Studio.

The exit code returned from an install hook will be “remembered”. If a previously installed package is either installed again via hab pkg install or loaded into a Supervisor, its install hook will be rerun if it previously failed (exited with a non 0 result) or has not been previously run (perhaps because --ignore-install-hook was passed to hab pkg install).

An install hook, unlike other hooks, will not have access to any census data exposed via binds or the svc namespace. Also, configuration in svc_config_path is not accessible to an install hook. If an install hook needs to use templated configuration files, templates located in the svc_config_install_path may be referenced. This location will contain rendered templates in a package’s config_install folder. Finally, any configuration updates made during a service’s runtime that would alter an install hook or any configuration template in svc_config_install_path will not cause a service to reload.

reload

File location: <plan>/hooks/reload. This hook is now deprecated; you should use reconfigure instead (see below). To provide backward compatibility, if a reload hook is provided, the service will restart in response to configuration changes.

reconfigure

File location: <plan>/hooks/reconfigure. A reconfigure hook can be written for services that can respond to changes in <plan>/config without requiring a restart. This hook will execute instead of the default behavior of restarting the process. {{pkg.svc_pid_file}} can be used to get the PID of the service.

Habitat does not support changing the PID of the underlying service in any lifecycle hook. If part of a service’s reconfiguration relies on changing the PID, you should not provide a reconfigure hook, and instead, use the default behavior of restarting the service for reconfiguration.

The reconfigure hook is not necessarily run on every change to <plan>/config. The reconfigure hook will not be run if the service restarts before the reconfigure hook has run. The restart is considered sufficient for reconfiguring the service. For example, when applying a configuration that changes both the run hook and <plan>/config, the change to the run hook will trigger a restart. Therefore, the reconfigure hook will not be run. To put it another way, the reconfigure hook will only respond to changes in <plan>/config after the service has started.

suitability

File location: <plan>/hooks/suitability. The suitability hook allows a service to report a priority by which it should be elected leader. The hook is called when a new election is triggered and the last line it outputs to stdout should be a number parsable as a u64. In the event that a leader goes down and an election is started the service with the highest reported suitability will become the new leader.

run

File location: <plan>/hooks/run. This hook is run when one of the following conditions occur:

  • The main topology starts, after the init hook has been called.
  • When a package is updated, after the init hook has been called.
  • When the package config changes, after the init hook has been called, but before a reconfigure hook is called.

You can use this hook in place of $pkg_svc_run when you need more complex behavior such as setting environment variables or command options that are based on dynamic configuration.

Services run using this hook should do two things:

  • Redirect stderr to stdout (e.g. with exec 2>&1 at the start of the hook)
  • Call the command to execute with exec <command> <options> rather than running the command directly. This ensures the command is executed in the same process and that the service will restart correctly on configuration changes.

It is important to also consider what side effects the command to execute will have. For example, does the command spin off other processes in separate process groups? If so, they may not be cleaned up automatically when the system is reconfigured. In general, the command executed should behave in a manner similar to a daemon, and be able to clean up properly after itself when it receives a SIGTERM, and properly forward signals to other processes that it creates. For an even more specific example: let’s say you are trying to start a node.js service. Instead of your command being npm start, you should use node server.js directly.

A run hook can use the following as a template:

#!/bin/sh

#redirect stderr
exec 2>&1

# Set some environment variables
export MY_ENVIRONMENT_VARIABLE=1
export MY_OTHER_ENVIRONMENT_VARIABLE=2

# Run the command
exec my_command --option {{cfg.option}} --option2 {{cfg.option2}}

Note

If the run hook exits it will be considered as a run failure. The service will be restarted with the configured service backoff regardless of the exit code that was returned by the hook.

post-run

File location: <plan>/hooks/post-run. The post run hook will get executed after initial startup. For many data services creation of specific users / roles or datastores is required. This needs to happen once the service has already started.

post-stop

File location: <plan>/hooks/post-stop. The post-stop hook will get executed after service has been stopped successfully. You may use this hook to undo what the init hook has done.

uninstall

File location: <plan>/hooks/uninstall. This hook is run when a package is uninstalled.

The uninstall hook runs when the last package of an origin/package is uninstalled. If there are other versions or revisions installed for the package, the uninstall hook is skipped. When more than one revision of an origin are uninstalled at the same time, the process removes them from oldest to newest. This ensures that the uninstall hook of the latest revision is the version that runs.

Like the install hook, the uninstall hook is not limited to packages that are loaded as services into a Supervisor. Also like the install hook, configuration in svc_config_path is not accessible to an uninstall hook. If an uninstall hook needs to use templated configuration files, templates located in the svc_config_install_path may be referenced. This location will contain rendered templates in a package’s config_install folder. Finally, any configuration updates made during a service’s runtime that would alter an uninstall hook or any configuration template in svc_config_install_path will not cause a service to reload.

Edit this page on GitHub

Thank you for your feedback!

×









Search Results